Clear tack coat



Quick drying primer for use on concrete or blocks.  Overcoat can be applied in just over 30 minutes.

An effective solvent-based primer for bonding thermoplastic materials to concrete and worn bituminous surfaces. Its low viscosity facilitates deep penetration into substrates. This clear tack coat can be applied by spraying, by brush or roller.

Virtually colourless and with superior adhesion enhancement and ready to use – no mixing required, fast drying and easy to apply.


Coverage Approx. 12 to 15 m2 per litre @ 66 to 83 microns wet film thickness

Specific Gravity (SG) Approx. 0.86 Flash Point -5°C Application Surface Temp 1 to 50°C

Drying Time Touch dry in 10 to 15 minutes but over-coating should not take place within 30 minutes


There are no reviews yet.

Be the first to review “Clear tack coat”