Demarcation Studs 25mm Diameter

£2.00£4.95

Includes delivery UK Mainland Excluding Norther Ireland Highlands and Islands

Category: SKU: SSDS

Description

available in both brass and 316 stainless steel, demarcation studs can be used to delineate walkways, parking bays, pavement cafés, market stalls etc etc..

There are three sizes of demarcation studs 25mm, 50mm and 100mm diameter please refer to the relevant product listings.

The 25mm diameter head stud, is 6mm high, with sloped edges and a flat top measuring 14mm diameter and meets the requirement for tactile surfacing.

The shank is 30mm long and 9mm in diameter.

Price per stud is based on a minimum order quantity of 5.

Demarcation studs from Sportsmark are designed to meet the recognised requirements for tactile surfacing, ensuring that walkways are safely marked for those that are visually impaired. Over one million UK residents are registered as legally blind, with roughly 5% of those having no sight at all.

The purpose of demarcation studs and tactile surfaces, as per the Department of the Environment, Transport and the Regions is: “To provide a warning to visually impaired people who would otherwise, in the absence of a kerb upstand >25mm high, find it difficult to differentiate between where the footway ends and the carriageway begins.

“The surface is, therefore, an essential safety feature for this group of road users at pedestrian crossing points, where the footway is flush with the carriageway to enable wheelchair users to cross unimpeded.”

The Need for Demarcation Studs

If your facility is responsible for pavements and or car parking, then you need to ensure that these areas can be used safely by all members of the public.

How to Install Demarcation Studs

Drill a hole of 10-12mm diameter to a depth of 35mm then clear the dust away from the interior of the hole and surface to be covered by the head of the marker. Apply a small quantity of 2-pack epoxy adhesive into the hole and the surface area immediately around the hole. Press the stud firmly into the hole until it is flush with the surface. Finally, remove any excess adhesive.

Additional information

Material

Stainless Steel, Brass

Quantity

5-9, 10-49, 50-99, 100-499, 500-1999, 2000+

Reviews

There are no reviews yet.

Be the first to review “Demarcation Studs 25mm Diameter”